Allied Telesis VERSION 5.4.3-2.6, BGP4 manual Awplusconfig-router#no neighbor 10.10.10.1 activate

BGP and BGP4+ Commands

To disable an exchange of routes with a neighboring router with the IPv4 address 10.10.10.1, enter the commands as shown below:

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#no neighbor 10.10.10.1 activate

To enable an exchange of routes in Address Family Configuration mode with a neighboring router with the IPv4 address 10.10.10.1, enter the commands as shown below:

awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	address-family ipv4
awplus(config-router-af)#	neighbor 10.10.10.1 activate

To disable an exchange of routes in Address Family Configuration mode with a neighboring router with the IPv4 address 10.10.10.1, enter the commands as shown below:

awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	address-family ipv4
awplus(config-router-af)#	no neighbor 10.10.10.1 activate

To enable an exchange of routes with a neighboring router with the peer-group named group1, enter the commands as shown below:

awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	neighbor group1 peer-group
awplus(config-router)#	neighbor 10.10.0.63 remote-as 10
awplus(config-router)#	neighbor 10.10.0.63 peer-group group1
awplus(config-router)#	neighbor group1 activate

To disable an exchange of routes with a neighboring router with the peer-group named group1, enter the commands as shown below:

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#no neighbor group1 activate

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.83