Allied Telesis VERSION 5.4.3-2.6, BGP4 manual Show ip bgp neighbors keepalive BGP

BGP and BGP4+ Commands

show ip bgp neighbors keepalive (BGP)

Use this command to display the number of keepalive messages sent to the neighbor from the peer throughout the session.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp neighbors <ipv4-addr> keepalive

Parameter	Description
<ipv4-addr>	The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
	notation A.B.C.D.

Mode User Exec and Privileged Exec

Examples

awplus# show ip bgp neighbors 10.11.4.26 keepalive

Related Commands show ip bgp neighbors keepalive-interval (BGP)

show ip bgp neighbors keepalive-interval (BGP)

Use this command to display the configured keepalive-interval value of the peer at the session establishment time with the neighbor.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp neighbors {<ipv4-addr><ipv6-addr>} keepalive-interval

Parameter	Description
<ipv4-addr>	The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
	notation A.B.C.D.

Default The keepalive timer default is 60 seconds as per RFC 4271. Keepalive is holdtime / 3.

Mode User Exec and Privileged Exec

Examples

awplus# show ip bgp neighbors 10.11.4.26 keepalive-interval

Related Commands neighbor timers (BGP and BGP4+) show ip bgp neighbors hold-time (BGP) timers (BGP and BGP4+)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.235