Allied Telesis VERSION 5.4.3-2.6, BGP4 Show ip protocols bgp BGP, Awplus# show ip protocols bgp

BGP and BGP4+ Commands

show ip protocols bgp (BGP)

Use this command to display BGP process parameters and statistics.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip protocols bgp

Mode User Exec and Privileged Exec

Example To display BGP process parameters and statistics, use the command:

awplus# show ip protocols bgp

Output

Routing Protocol is "bgp 100"

IGP synchronization is disabled Automatic route summarization is disabled

Default local-preference applied to incoming route is 100 Redistributing:

Neighbor(s):

Address AddressFamily FiltIn FiltOut DistIn DistOut RouteMapIn RouteMapOut Weight

10.10.10.1unicast

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.247