BGP and BGP4+ Commands
Output Figure
awplus#show bgp ipv6 neighbors 2001:db8:b::1
BGP neighbor is 2001:db8:b::1, remote AS 200, local AS 100, external link BGP version 4, remote router ID 2.2.2.1
BGP state = Established, up for 01:03:26
Last read 01:03:26, hold time is 90, keepalive interval is 30 seconds Neighbor capabilities:
Route refresh: advertised and received (old and new)
Address family IPv4 Unicast: advertised and received
Address family IPv6 Unicast: advertised and received Received 157 messages, 0 notifications, 0 in queue Sent 228 messages, 0 notifications, 0 in queue
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 30 seconds Update source is lo
For address family: IPv4 Unicast
BGP table version 1, neighbor version 1 Index 2, Offset 0, Mask 0x4
Community attribute sent to this neighbor (both)
0 accepted prefixes
0 announced prefixes
For address family: IPv6 Unicast
BGP table version 66, neighbor version 66
Index 2, Offset 0, Mask 0x4
Graceful restart: advertised, received
Community attribute sent to this neighbor (both) Default information originate, default sent Inbound path policy configured
Incoming update prefix filter list is *BGP_FILTER_LIST Route map for incoming advertisements is *BGP_LOCAL_PREF_MAP 8 accepted prefixes
8 announced prefixes
Connections established 1; dropped 0
Remote
External BGP neighbor may be up to 2 hops away.
Local host: 2001:db8:a::1, Local port: 179
Foreign host: 2001:db8:b::1, Foreign port: 50672
Nexthop: 1.1.1.1
Nexthop global: 2001:db8:a::1
Nexthop local: ::
BGP connection: non shared network
Related Commands show ip bgp neighbors (BGP)
| Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches |
|
AlliedWare PlusTM Operating System - Software Version | 3.213 |
