![](/images/new-backgrounds/1191620/191620647x1.webp)
BGP and BGP4+ Commands
show ip bgp dampening (BGP)
Use this command to show dampened routes from a BGP instance within an IPv4 environment. Use the show bgp ipv6 dampening (BGP4+) command within an IPv6 environment.
For information on output options, see “Controlling “show” Command Output” on page 3.6.
Syntax show ip bgp dampening
Syntax [VRF] show ip bgp [unicast] dampening
show ip bgp [globalvrf
Parameter | Description |
global | When |
| routing and forwarding table. |
|
|
vrf | Apply the command to the specified VRF instance. |
|
|
| The name of the VRF instance. |
|
|
| Display paths suppressed due to dampening. |
|
|
| Display flap statistics of routes. |
|
|
parameters | Display details of configured dampening parameters. |
|
|
Mode User Exec and Privileged Exec
Usage Enable BGP dampening to maintain
Examples
awplus# show ip bgp dampening
awplus# show ip bgp vrf red dampening
Output Figure
dampening 15 | 750 2000 60 15 |
|
|
Reachability | : 15 | min | |
Reuse penalty | : 750 | ||
Suppress penalty | : 2000 | ||
Max suppress time | : 60 | min | |
: 15 | min | ||
Max penalty | (ceil) | : 11999 | |
Min penalty | (floor) | : 375 | |
|
|
|
|
The following example output shows that the internal route (i), has flapped 3 times and is now categorized as history (h).
| Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches |
|
3.226 | AlliedWare PlusTM Operating System - Software Version |