Allied Telesis BGP4, VERSION 5.4.3-2.6 Show ip bgp neighbors update BGP, Show ip bgp paths BGP

BGP and BGP4+ Commands

show ip bgp neighbors update (BGP)

Use this command to display the number of update messages sent to the neighbor from the peer throughout the session.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp neighbors <ipv4-addr> update

Parameter	Description
<ipv4-addr>	The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
	notation A.B.C.D.

Mode User Exec and Privileged Exec

Example

awplus# show ip bgp neighbors 10.11.4.26 update

show ip bgp paths (BGP)

Use this command to display BGP4 path information within an IPv4 environment. Use the show bgp ipv6 paths (BGP4+) command to display BGP4+ path information within an IPv4 environment.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp paths

Mode User Exec and Privileged Exec

Example

awplus# show ip bgp paths

Related Commands show bgp ipv6 paths (BGP4+)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.238	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D