
BGP and BGP4+ Configuration
Router 2
awplus#
configure terminal Enter the Global Configuration mode.
awplus(config)#
router bgp 11 Define the BGP4+ routing process. The number 11 specifies the Autonomous System (AS) number of Router 2.
awplus(config-router)#
bgp
awplus(config-router#
neighbor 2001:db8::10:10
10session by specifying the global unicast IPv6 address (2001:db8::10:10) and the AS number (10) of neighbor Router 1.
awplus(config-router)#
awplus(config-router-af)#
network 2001:db8:11::/48 Announces IPv6 network prefix 2001:db8:11::/48. Running show ipv6 bgp command on Router 1 displays Router 1 receiving 2001:db8:11::/48 packets.
awplus(config-router-af)#
network 2001:db8:12::/48 Announces IPv6 network prefix 2001:db8:12::/48. Running show ipv6 bgp command on Router 1 displays Router 1 rejecting 2001:db8:12::/48 packets.
awplus(config-router-af)#
neighbor 2001:db8::10:10 activate
Activate the exchange of information to the peer (neighbor) Router 1 (2001:db8::10:10) and enable the exchange of IPv6 address prefix types with this neighbor. Note that other information apart from prefixes is sent in updates. This command activates the exchange of information for the peer defined.
awplus(config-router-af)#
awplus(config-router)#
exit Exit the Router Configuration mode, and return to the Global Configuration mode.
| Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches |
|
AlliedWare PlusTM Operating System - Software Version | 2.33 |