Allied Telesis BGP4, VERSION 5.4.3-2.6 manual Neighbor 2001db8115 activate, Show ip bgp BGP

BGP and BGP4+ Configuration

Router 31

awplus(config)#

configure terminal Enter the Global Configuration mode.

awplus(config-router)#

router bgp 300 Define the BGP routing process. The number 300 specifies the AS number of Router 3.

awplus(config-router)#

address-family ipv4 unicast Enter the IPv4 Address Family Configuration mode from the Global Configuration mode.

awplus(config-router-af)#

neighbor 2001:db8::115 remote-asSpecify the neighbor’s IPv6 address (2001:db8::115)

200and Autonomous System (AS) number (200). Router 2 is the neighbor of Router 1.

awplus(config-router-af)#

neighbor 2001:db8::115 activate

Activate the exchange of information to the peer (neighbor) with the IPv6 address 2001:db8::115 for Router 2 in IPv6 Address Family Configuration mode. Note that other information apart from prefixes is sent in updates. This command activates the exchange of information for the peer defined.

awplus(config-router-af)#

exit-address-familyExit IPv6 Address Family Configuration mode, and return to the Router Configuration mode.

awplus(config-router)#

exit Exit the Router Configuration mode, and return to the Global Configuration mode.

Names of Commands Used

address-family (BGP and BGP4+) exit-address-family (BGP and BGP4+) neighbor activate (BGP and BGP4+) neighbor remote-as (BGP and BGP4+) neighbor weight (BGP and BGP4+) router bgp (BGP and BGP4+)

Validation Commands

show ip bgp (BGP)

show ip bgp neighbors (BGP) show ip bgp summary (BGP)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
2.22	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D