Clear bgp ipv6 peer-group BGP4+ | Allied Telesis VERSION 5.4.3-2.6

clear bgp ipv6 peer-group (BGP4+)

Use this command to reset the BGP4+ connections to all members of a peer group.

Syntax clear bgp ipv6 peer-group <peer-name>

clear bgp ipv6 peer-group <peer-name> in [prefix-filter] clear bgp ipv6 peer-group <peer-name> out

clear bgp ipv6 peer-group <peer-name> soft [inout] clear bgp ipv6 peer-group <peer-name>

clear bgp ipv6 peer-group <peer-name> in [prefix-filter] clear bgp ipv6 peer-group <peer-name> out

clear bgp ipv6 peer-group <peer-name> soft [inout]

	Parameter	Description

	peer-group	Clears all members of a peer group.

	<peer-name>	Specifies the name of the peer group for which all members will be
		cleared.

	ipv6	Clears all IPv6 address family peers. Configure parameters relating
		to the BGP4+ exchange of IPv6 prefixes.

	in	Indicates that incoming advertised routes will be cleared.

	prefix-filter	Specifies that a prefix-list will be sent, by the ORF mechanism, to
		those neighbors with which the ORF capability has been
		negotiated. The neighbors will be triggered to resend updates,
		which match the prefix-list filter, to the local router. The local router
		will then perform a soft reconfiguration.

	out	Indicates that outgoing advertised routes will be cleared.

	soft in	Soft inbound reset causes the neighbors to resend all their updates
		to the local switch, without resetting the connection or clearing
		the entries in the local switch. So, the local switch stores new
		updates, and uses them to systematically replace existing table
		entries. This process can use a considerable amount of memory.

	soft out	Soft outbound reset causes the switch to simply resend all its
		updates to the specified neighbor(s), without resetting the
		connection, or clearing table entries.

Mode Privileged Exec
Example

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.61