Allied Telesis VERSION 5.4.3-2.6 Neighbor remote-as BGP and BGP4+, As-number, Global, Vrf

BGP and BGP4+ Commands

neighbor remote-as (BGP and BGP4+)

Use this command to configure an internal or external BGP or BGP4+ (iBGP or eBGP) peering relationship with another router.

Use the no variant of this command to remove a previously configured BGP or BGP4+ peering relationship.

Syntax [BGP/BGP4+] neighbor <neighborid> remote-as <as-number> no neighbor <neighborid> remote-as <as-number>

Syntax [VRF] neighbor <neighborid> remote-as <as-number> [globalvrf <vrf-name>] no neighbor <neighborid> remote-as <as-number>

Parameter	Description
<neighborid>	{<ip-address>ipv6-addr><peer-group>}
	<ip-address>	Specify the address of an IPv4 BGP neighbor,
		in dotted decimal notation A.B.C.D.
	<ipv6-addr>	Specify the address of an IPv6 BGP4+
		neighbor, entered in hexadecimal in the
		format X:X::X:X.
	<peer-group>	Enter the name of an existing peer-group. For
		information on how to create peer groups,
		refer to the neighbor peer-group (add a
		neighbor) (BGP and BGP+) command on
		page 3.144, and neighbor route-map (BGP
		and BGP4+) command on page 3.159. When
		this parameter is used with this command, the
		command applies on all peers in the specified
		group.
<as-number>	<1-4294967295>Neighbor’s Autonomous System (AS)
	number.
global	Specify that the remote neighbor exists locally within the device, in
	the global routing domain
vrf	Specify that the remote neighbor exists locally within the device, in
	the specified VRF instance.
<vrf-name>	The name of the VRF instance.

Mode [BGP] Router Configuration or IPv4 Address Family Configuration for a VRF instance

Mode [BGP4+] Router Configuration

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.152	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D