BGP and BGP4+ Commands

Examples [BGP4+]

awplus#

configure terminal

awplus(config)#

router bgp 10

awplus(config-router)#

neighbor 2001:0db8:010d::1 capability

 

route-refresh

awplus#

configure terminal

awplus(config)#

router bgp 10

awplus(config-router)#

no neighbor 2001:0db8:010d::1 capability

 

route-refresh

awplus# configure terminal awplus(config)# router bgp 10

awplus(config-router)#neighbor group1 peer-group

awplus(config-router)#neighbor 2001:0db8:010d::1 remote-as 10

awplus(config-router)# address-family ipv6

awplus(config-router-af)#neighbor 2001:0db8:010d::1 peer-group group1

awplus(config-router-af)# exit

awplus(config-router)#neighbor group1 capability route-refresh

awplus# configure terminal awplus(config)# router bgp 10

awplus(config-router)#no neighbor group1 capability route-refresh

Related Commands neighbor peer-group (add a neighbor) (BGP and BGP+) neighbor route-map (BGP and BGP4+)

 

Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches

 

3.104

AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6

C613-50032-01 REV D

Page 202
Image 202
Allied Telesis BGP4, VERSION 5.4.3-2.6 manual Neighbor 20010db8010d1 capability