1 Unpack the Printer
1Carefully remove all items from the box.
i 470D Series
Photo Printer
Paper Rest
Documentation
and Software Kit
i 470D Series Print Head | Power Cord |
Ink Tanks
2 Prepare the Printer
1Remove all shipping tape from the front and sides of the printer.
Shipping
Tape
2Plug the power cord into the back of the printer and connect the other end to a power outlet.
3Press the Power button.
Power | Power |
Button | Lamp |
4Open the output tray, then open the front cover. The print head holder automatically moves to the center.
Output Tray
Serial number
Write down the serial number located to the right of the print head. You will need this later to register the product.
Start Here
Easy Setup Instructions
3 Install the Print Head
1Remove the print head from its package.
Tear at notch to open
2Remove the orange protective cap.
NOTE: Do not touch the electrical contacts on the back and bottom of the print head.
Electrical contacts
3Raise the gray lock lever on the printer.
4Slide the print head into the holder until it is securely seated.
Do not press it down.
5Lower the lever until it locks into place.
4 Install the Ink Tanks
1Remove the black ink tank
NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap.
Protective cap
2Insert the black ink tank into the slot on the right, then push in until the ink tank locks into place.
Click
3Repeat the procedure for the color ink tank
4Close the front cover, attach the paper rest and pull out the output tray.
i470DSeries
Photo Printer
5 Connect the Printer To Your Computer
1Turn the printer off.
IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready.
2Connect one end of a USB cable (not included) to the computer, the other to the printer.
USB Port
USB Cable
