Allied Telesis VERSION 5.4.3-2.6, BGP4 manual Neighbor 2001db8115 activate

BGP and BGP4+ Configuration

awplus(config-router-af)#

aggregate-address 2001:db8::102/64 Configure an IPv6 non-AS-set aggregate route on Router summary-only2. Note that the local distance gets applied to this route.

awplus(config-router-af)#Activate the exchange of information to the peer neighbor 2001:db8::121 activate (neighbor) with the global unicast IPv6 address

2001:db::121 for Router 1. Note that other information apart from prefixes is sent in updates. This command activates the exchange of information for the peer defined.

awplus(config-router-af)#

neighbor 2001:db8::115 activate

Activate the exchange of information to the peer (neighbor) with the global unicast IPv6 address 2001:db8::115 for Router 3. Note that other information apart from prefixes is sent in updates. This command activates the exchange of information for the peer defined.

awplus(config-router-af)#

distance 12 13 11 Configure the administrative distance for external, internal, and local routes received in IPv6 Address Family Configuration mode.

awplus(config-router-af)#

exit-address-familyExit IPv6 Address Family Configuration mode, and return to the Router Configuration mode.

awplus(config-router)#

exit Exit the Router Configuration mode, and return to the Global Configuration mode.

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	2.41