Allied Telesis VERSION 5.4.3-2.6 Clear ip bgp external BGP, Awplus# clear ip bgp external out

BGP and BGP4+ Commands

clear ip bgp external (BGP)

Use this command to reset the BGP connections to all external peers.

Syntax clear ip bgp external [in [prefix-filter]outsoft [inout]]

clear ip bgp external

clear ip bgp external in [prefix-filter] clear ip bgp external out

clear ip bgp external soft [inout]

	Parameter	Description
	external	Clears all external peers.
	ipv4	Clears all IPv4 address family peers. Configure parameters relating
		to the BGP exchange of IPv4 prefixes.
	in	Indicates that incoming advertised routes will be cleared.
	prefix-filter	Specifies that a prefix-list will be sent, by the ORF mechanism, to
		those neighbors with which the ORF capability has been
		negotiated. The neighbors will be triggered to resend updates,
		which match the prefix-list filter, to the local router. The local
		router will then perform a soft reconfiguration.
	out	Indicates that outgoing advertised routes will be cleared.
	soft in	Soft inbound reset causes the neighbors to resend all their
		updates to the local switch, without resetting the connection or
		clearing the entries in the local switch. So, the local switch stores
		new updates, and uses them to systematically replace existing
		table entries. This process can use a considerable amount of
		memory.
	soft out	Soft outbound reset causes the switch to simply resend all its
		updates to the specified neighbor(s), without resetting the
		connection, or clearing table entries.
Mode Privileged Exec
Examples

awplus# clear ip bgp external out

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.55