
| BGP Optimization | 1.35 |
| How to determine Backdoor Routes | 1.35 |
| How to set the BGP Administrative Distance | 1.35 |
| How to change BGP default local preference value | 1.35 |
| How to redistribute the default network 0.0.0.0 | 1.36 |
| How to adjust BGP Timers | 1.36 |
| How to adjust the eBGP advertisement interval | 1.37 |
| How to adjust the iBGP advertisement interval | 1.37 |
| How to adjust the AS origination interval | 1.38 |
| How to remove private AS numbers for BGP | 1.39 |
| BGP and BGP4+ Terminology | 1.42 |
| Chapter 2 BGP and BGP4+ Configuration |
|
| Introduction | 2.2 |
| BGP Configurations | 2.3 |
| Enabling BGP Peers In The Same Autonomous System | 2.3 |
| Enabling BGP Between Different Autonomous Systems | 2.5 |
| Configuring a BGP Route Reflector | 2.6 |
| Configuring a BGP Confederation | 2.8 |
| Configuring BGP Authentication | 2.11 |
| Configuring BGP Graceful Reset | 2.13 |
| Configuring BGP Distance | 2.15 |
| Configuring BGP Graceful Restart | 2.18 |
| Configuring BGP Weight per Peer | 2.20 |
| BGP4+ Configurations | 2.23 |
| Enabling iBGP Peering using a Global Address | 2.23 |
| Enabling iBGP Peering using a | 2.26 |
| Enabling eBGP Peering between different Autonomous Systems | 2.29 |
| Configuring | 2.31 |
| Configuring BGP4+ Graceful Restart | 2.35 |
| Configuring BGP4+ Distance | 2.39 |
| Configuring BGP4+ Graceful Reset | 2.43 |
| Chapter 3 BGP and BGP4+ Commands |
|
| Introduction | 3.5 |
| Controlling “show” Command Output | 3.6 |
| Command List | 3.8 |
| 3.8 | |
| 3.10 | |
| 3.12 | |
| bgp | 3.13 |
| bgp | 3.14 |
| bgp bestpath | 3.15 |
| bgp bestpath | 3.15 |
| bgp bestpath | 3.16 |
| bgp bestpath med (BGP and BGP4+) | 3.17 |
| bgp bestpath med | 3.18 |
| bgp bestpath med | 3.18 |
| bgp | 3.19 |
| bgp | 3.20 |
| bgp confederation identifier (BGP and BGP4+) | 3.21 |
| bgp confederation peers (BGP and BGP4+) | 3.22 |
| bgp | 3.24 |
| bgp dampening (BGP and BGP4+) | 3.26 |
| bgp default | 3.27 |
| bgp default | 3.28 |
|
|
|
| Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches |
|
i.iv | AlliedWare PlusTM Operating System - Software Version |