Allied Telesis VERSION 5.4.3-2.6, BGP4 manual 145

BGP and BGP4+ Commands

To create a peer-group use the neighbor port (BGP and BGP4+) command on page 3.147 and then use this command to add neighbors to the group.

Examples [BGP] This example shows a new peer-group group1 and the addition of a neighbor

10.10.0.63to the group.

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#neighbor group1 peer-group

awplus(config-router)#neighbor 10.10.0.63 peer-group group1

This example shows a new peer-group group1 and the removal of a neighbor

10.10.0.63to the group.

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#neighbor group1 peer-group

awplus(config-router)#no neighbor 10.10.0.63 peer-group group1

Examples [BGP4+] This example shows a new peer-group group1 and the addition of a neighbor 2001:0db8:010d::1 to the group.

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#neighbor group1 peer-group

awplus(config-router)# address-family ipv6

awplus(config-router-af)#neighbor 2001:0db8:010d::1 peer-group group1

This example shows a new peer-group group1 and the removal of a neighbor 2001:0db8:010d::1 to the group.

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#neighbor group1 peer-group

awplus(config-router)# address-family ipv6

awplus(config-router-af)#no neighbor 2001:0db8:010d::1 peer-group group1

Related Commands neighbor peer-group (create a peer-group) (BGP and BGP4+) neighbor port (BGP and BGP4+)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.145