Allied Telesis BGP4, VERSION 5.4.3-2.6 manual Clear ip bgp peer-group BGP, Peer-name

BGP and BGP4+ Commands

clear ip bgp peer-group (BGP)

Use this command to reset the BGP connections to all members of a peer group.

Syntax clear ip bgp peer-group <peer-name>

clear ip bgp peer-group <peer-name> in [prefix-filter] clear ip bgp peer-group <peer-name> out

clear ip bgp peer-group <peer-name> soft [inout] clear ip bgp peer-group <peer-name> out

clear ip bgp peer-group <peer-name> soft [inout]

	Parameter	Description
	peer-group	Clears all members of a peer group.
	<peer-name>	Specifies the name of the peer group for which all members will be
		cleared.
	ipv4	Clears all IPv4 address family peers. Configure parameters relating
		to the BGP exchange of IPv4 prefixes.
	in	Indicates that incoming advertised routes will be cleared.
	prefix-filter	Specifies that a prefix-list will be sent, by the ORF mechanism, to
		those neighbors with which the ORF capability has been
		negotiated. The neighbors will be triggered to resend updates,
		which match the prefix-list filter, to the local router. The local router
		will then perform a soft reconfiguration.
	out	Indicates that outgoing advertised routes will be cleared.
	soft in	Soft inbound reset causes the neighbors to resend all their updates
		to the local switch, without resetting the connection or clearing
		the entries in the local switch. So, the local switch stores new
		updates, and uses them to systematically replace existing table
		entries. This process can use a considerable amount of memory.
	soft out	Soft outbound reset causes the switch to simply resend all its
		updates to the specified neighbor(s), without resetting the
		connection, or clearing table entries.
Mode Privileged Exec
Examples

awplus# clear ip bgp peer-group Peer1 out

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.56	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D