Allied Telesis Clear bgp external BGP and BGP4+, External, Awplus# clear bgp external soft

BGP and BGP4+ Commands

clear bgp external (BGP and BGP4+)

Use this command to reset the BGP and BGP4+ connections for all external peers.

Syntax [BGP/BGP4+]	clear bgp external [in [prefix-filter]outsoft [inout]]
	Parameter	Description
	external	Clears all external peers.
	in	Indicates that incoming advertised routes will be cleared.
	prefix-filter	Specifies that a prefix-list will be sent, by the ORF mechanism, to
		those neighbors with which the ORF capability has been
		negotiated. The neighbors will be triggered to resend updates,
		which match the prefix-list filter, to the local router. The local
		router will then perform a soft reconfiguration.
	out	Indicates that outgoing advertised routes will be cleared.
	soft in	Soft inbound reset causes the neighbors to resend all their
		updates to the local switch, without resetting the connection or
		clearing the entries in the local switch. So, the local switch stores
		new updates, and uses them to systematically replace existing
		table entries. This process can use a considerable amount of
		memory.
	soft out	Soft outbound reset causes the switch to simply resend all its
		updates to the specified neighbor(s), without resetting the
		connection, or clearing table entries.
Mode [BGP/BGP4+]	Privileged Exec
Examples

[BGP/BGP4+]	awplus# clear bgp external soft in
	awplus# clear bgp external in prefix-filter

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.48	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D