Allied Telesis BGP4, VERSION 5.4.3-2.6 manual Neighbor group1 passive, No neighbor group1 passive

BGP and BGP4+ Commands

awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	neighbor group1 peer-group
awplus(config-router)#	neighbor 10.10.10.72 remote-as 10
awplus(config-router)#	neighbor 10.10.10.72 peer-group group1
awplus(config-router)#	neighbor group1 passive
awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	no neighbor group1 passive
Examples [BGP4+]
awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	neighbor 2001:0db8:010d::1 passive
awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	no neighbor 2001:0db8:010d::1 passive

awplus#		configure terminal
awplus(config)#		router bgp 10
awplus(config-router)#		neighbor group1 peer-group
awplus(config-router)#		neighbor 2001:0db8:010d::1 remote-as
		10
awplus(config-router)#		address-family ipv6
awplus(config-router-af)#		neighbor 2001:0db8:010d::1 peer-group
		group1
awplus(config-router-af)#		exit
awplus(config-router)#		neighbor group1 passive
awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	no neighbor group1 passive

Related Commands neighbor peer-group (add a neighbor) (BGP and BGP+) neighbor route-map (BGP and BGP4+)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.140	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D