Allied Telesis BGP4, VERSION 5.4.3-2.6 manual Show ip bgp neighbors connection-retrytime BGP

BGP and BGP4+ Commands

show ip bgp neighbors connection-retrytime (BGP)

Use this command to display the configured connection-retrytime value of the peer at the session establishment time with the neighbor.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp neighbors <ipv4-addr>connection-retrytime

Parameter	Description
<ipv4-addr>	The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
	notation A.B.C.D.

Mode User Exec and Privileged Exec

Example

awplus# show ip bgp neighbors 10.11.4.26 connection-retrytime

show ip bgp neighbors hold-time (BGP)

Use this command to display the configured holdtime value of the peer at the session establishment time with the neighbor.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp neighbors <ipv4-addr>hold-time

Parameter	Description
<ipv4-addr>	The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
	notation A.B.C.D.

Default The holdtime timer default is 90 seconds as per RFC 4271. Holdtime is keepalive * 3.

Mode User Exec and Privileged Exec

Examples

awplus# show ip bgp neighbors 10.11.4.26 hold-time

Related Commands neighbor timers (BGP and BGP4+)

show ip bgp neighbors keepalive-interval (BGP) timers (BGP and BGP4+)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.234	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D