Speed Duplex — Shows the current speed and duplex mode. (Auto or fixed choice)

In the Advanced Port Configuration page you can set the Switch’s broadcast storm control and threshold limits.

Figure 11 Advanced Port Configuration Screen

Broadcast Storm Control — Shows if broadcast storm control is enabled or disabled.

Packet Rate Threshold — Shows the broadcast storm threshold. (500 - 15000 packets per second)

VLANs

The Switch uses VLANs to organise any group of ports into separate broadcast domains. VLANs confine broadcast traffic to the originating group and can eliminate broadcast storms in large networks. This also provides a more secure and cleaner network environment.

You can create up to 256 VLANs, and either add specified ports to a chosen VLAN so that the port can only communicate with other ports on the VLAN, or specify that a port can belong to all VLANs.

Communication between different VLANs can only take place if they are all connected to a router or Layer 3 Switch.

25

Page 25
Image 25
3Com 2816-SFP Plus (3C16485), DUA 1648-5AAA02 manual VLANs, Advanced Port Configuration Screen