ADC MM702G2, MM701G2 View G.shdsl Configuration, Figure A-16. G.SHDSL Current Setting Menu

Appendix A: Command Line Interface Access April 14, 2006

Step Action

2• Test Bit Rate

(cont.)	Type 8 then select a rate (number 1 through 36) for the test bit rate. This test bit rate is used by the
	manufacturer for internal use only.

•SNR Margin Limit

Type 9 then enter a value from -64 to 63. This value indicates the minimum SNR margin (in decibels) that must exist when the G.shdsl connection is synchronized and in order for the DSL MAR LED to be lit ON Green. The default value is 6.

3 Type 5 to Apply the new configuration for the G.shdsl settings.

View G.shdsl Configuration

You can view G.shdsl current settings from the G.SHDSL Current Settings dialog. See “Complete an Advanced Configuration” on page A-20for definitions of these parameters that you previously set.

From the G.SHDSL Menu, enter 1 to display the G.SHDSL Current Setting menu (Figure A-16).

Figure A-16. G.SHDSL Current Setting Menu

A-22 MM70xG2-UM-03