ADC MM701G2, MM702G2 user manual Figure A-21. Restoring Factory Defaults

April 14, 2006 Appendix A: Command Line Interface Access

RESTORING FACTORY DEFAULTS

When you configure the modem, you change the factory default settings to new values. You can return these parameters to their default values to provide a known starting point if you are troubleshooting or you simply want to configure new parameters. For session default values, see “Default Session Parameter Values” on page B-4.

There are three ways to reset the modem to its factory default values:

•Using the Command Line Interface (below)

•Using the Web Interface (see “Reset to Factory Defaults using the Web Interface” on page 9-13)

•Using the modem’s Reset button (see “Reset to Factory Defaults using the Reset Button” on page 9-14)

IMPORTANT

!Active links are lost when you reset to factory default values.

Restoring Factory Defaults

Step		Action
1	From the System Management menu, enter 6 to Restore Factory Configuration (Figure A-21).
		Figure A-21. Restoring Factory Defaults
2	Do one of the following at the prompt:
	•	Enter Y if you want to return all values to their original factory values.
	•	Enter N if you do not want to return all values to their original factory values.

MM70xG2-UM-03 A-27