ADC MM702G2, MM701G2 user manual View System Log

Chapter 9: Managing the Modem April 14, 2006

The following is a description of the fields at the top of the Status page:

•Device Name

Identifies the modem and its LAN connection type (Ethernet port). This is not a configurable parameter.

•Firmware Release

Identifies the version number of the software image currently used on the modem.

•Model

Identifies the model of the modem.

•MAC Address

Identifies the unique, hardware address assigned to and resident on the modem.

•DSP Version

Identifies the version of the G.shdsl firmware driver used for the modem.

The following is a description of the fields in the Summary of current settings table:

•DSL Status

Provides configuration values specific to G.shdsl, including:

–Modulation—Indicates the G.shdsl transmission standard to which the modem is set.

–State—Status of the DSL link.

–Data Rate TX—Bit rate at which the is configured to send data.

–Data Rate RX—Bit rate at which the is configured to receive data.

–SNR Margin (DB)—Current SNR margin in decibels.

•WAN Session

See “Configure a New WAN Session” on page 4-2for definitions of WAN Session fields.

•LAN

See “Configure the LAN” on page 3-1for definitions of LAN fields.

View System Log

The Configuration Error Log shows errors that have occurred during the time the modem is operational. This error log is used by the manufacturer for internal use only.

Select System on the menu bar, then select System Log under System to access the Configuration Error Log page (Figure 9-2).

9-2 MM70xG2-UM-03