ADC MM702G2, MM701G2 user manual View the current statistics, as described below

Appendix A: Command Line Interface Access April 14, 2006

Step	Action
2	View the current statistics, as described below:
	• Operational State
	Indicates the current mode of the modem. Operational states include:
	– Handshaking—indicates that the modem is negotiating with the DSLAM or the other modem
	– Training—indicates that the modem is learning the connection parameters
	– Show time—indicates the G.shdsl connection is operational
	• Data Rate
	Indicates the bit rate for this transmission on the G.shdsl connection.
	• DSP Version
	Identifies the version of G.shdsl firmware driver used for this modem.
	• Transmission Power
	Indicates the local transmission power in decibels.
	• Receiver Gain
	Indicates the amplifying factor for incoming signal in decibels.
	• Local SNR Margin
	Indicates the current value for the SNR margin in decibels.
	• Loop Attenuation
	Indicates the current and approximate loop attenuation (loop signal loss) in decibels.
	• Framer Sync
	Indicates the current status of G.shdsl framer synchronization.

A-24 MM70xG2-UM-03