ADC MM702G2, MM701G2 user manual Figure A-12. PPPoA Routed Session

Appendix A: Command Line Interface Access April 14, 2006

Step	Action
2	Enter the session number to display the session screen. (Figure A-12below shows session 1, PPPoA-
	ROUTED.)
	Figure A-12. PPPoA Routed Session
3	Change settings as appropriate. See these sections for detailed information about editing parameters for
	these protocols:
	• “Set Up an RFC 1483 Bridged Session” on page A-10
	• “Set Up an RFC 1483 Routed Session” on page A-11
	• “Set Up a PPPoA or PPPoE Routed Session” on page A-13
4	Select Apply new setting to immediately activate the changes that you have made for this session.
5	Select Save Current configuration from the Main Menu as described in “Saving the Current
	Configuration” on page A-28or the changes will be lost upon reboot or power cycle.

A-16 MM70xG2-UM-03