![](/images/new-backgrounds/1299610/29961029x1.webp)
Chapter 1
INSTALLATION
OVERVIEW
The MM701G2 and MM702G2 are versatile,
•Configuration either as a
•Larger packet sizes to accommodate VLAN traffic (Maximum Ethernet Frame = 1536 bytes)
•32 simultaneous Bridge/Router or PPP sessions to the same or different service providers over the WAN interface
•Protocols and services such as DHCP server, DNS Relay, NAT, OAM, and RIP
UNPACK THE MODEM
If you store the modem for a long period of time, use the original antistatic bag and packaging. Observe environmental specifications as provided in Appendix B: Specifications.
Step | Action |
1 Remove the modem from the packaging (see Figure |
LINK
TX
RX
COL
PWR
SYNC
TX
RX
MAR
Figure 1-1. Remove the Modem
2Visually inspect the container for signs of damage. If the equipment was damaged in transit, report the damage to the transportation company and to the sales representative.
3Check the contents of the package for:
•6 Vdc power supply with cord
•Black CAT5 cable for Ethernet connection
•Silver cord for DSL connection
•Flat cable (gray) and
•USB cable