ADC MM702G2, MM701G2 user manual Connect to the Console Port

Appendix A: Command Line Interface Access April 14, 2006

CONNECT TO THE CONSOLE PORT

Step Action

1Install the flat gray console cable between the modem Console port and your PC (see Figure A-1), using the DB-9 port adapter on the PC, if required.

Figure A-1. Connect to the Console Port

Access the Command Line Interface

You can access the command line interface through the direct connection to the modem console port using a terminal emulation program. You can also access the command line interface using a telnet session. To use a telnet session, you must have IP access to the modem either through the 10/100Base-T LAN port (LAN-side access) or through an IP address assigned to a WAN session (WAN-side access). The following sections provide instructions for setting up both types of command line interface access.

A-2 MM70xG2-UM-03