ADC MM701G2, MM702G2 user manual Authentication, Login, Password, Permanently Save Sessions

April 14, 2006 Chapter 4: Configuring the WAN

Step	Action
1	• RIP Send
(cont.)	This session forwards RIP version 1 (Ver 1), RIP version 2 multicast (Ver2 (M-cast)), RIP version 2
	broadcast (Ver2 (B-cast)), or all versions of RIP packets. Select the RIP version or versions the
	modem will send on this session. The default is Ver2 (B-cast).
	• RIP Accept
	This session receives RIP version 1 (Ver 1) only, RIP version 2 (Ver 2) only, or both versions of RIP
	packets. Select the RIP version or versions the modem will receive for this session. The default is
	RIP Ver 1 and Ver 2.
	• Authentication
	Select the authentication protocol provided by your service provider for PPP sessions. The
	authentication protocol type must match at the modem and the service provider. The options are:
	– PAP—The modem sends authentication requests to the service provider and authentication occurs
	only once during the life of the DSL link.
	– CHAP—The service provider returns an authentication challenge to the modem during the
	authentication (default setting).
	– NONE—No authentication is required for the session.
	• Login
	Change the default login name (admin) for this PPP session to the Login name supplied by the
	service provider. Minimum login name length is one character and the maximum is 32 characters.
	• Password
	Change the default login password (password) for this PPP session to the Login password supplied
	by the service provider. Minimum password length is six characters and the maximum is 32
	characters.
2	Click Create to add the new PPPoA or PPPoE session to your session list on the WAN Configuration
	page.

Permanently Save Sessions

After you have set up all the WAN sessions, save these changes permanently, as described in “Saving Changes” on page 5-12.

MM70xG2-UM-03 4-9