ADC MM702G2, MM701G2 user manual Connector Pinouts, Table B-1. DSL Port RJ-11 2-Wire Pin Signal

Appendix B: Specifications April 14, 2006

CONNECTOR PINOUTS

The following sections provide the pinout information for the various modem connectors.

• DSL Port (RJ-11)

Table B-1shows the signal on each pin of the DSL port for a 2-wire G.shdsl application. The connector for this interface is an RJ-11. The modem accommodates Tip and Ring reversal on this one loop.

See Connect Cables on page 1-3for the location of this port.

Table B-1. DSL Port (RJ-11) (2-Wire)

Pin	Signal
1	Not used
2	No connection
3	Tip (Loop A)
4	Ring (Loop A)
5	No connection
6	Not used

Table B-2shows the signal on each pin of the DSL port for a 4-wire G.shdsl application. The connector for this interface is an RJ-11. The modem accommodates Tip and Ring reversal on each separate Loop A and Loop B. SeeConnect Cables on page 1-3for the location of this port.

Table B-2. DSL Port (RJ-11) (4-Wire)

Pin	Signal
1	Not used
2	Tip (Loop B)
3	Tip (Loop A)
4	Ring (Loop A)
5	Ring (Loop B)
6	Not used

B-6 MM70xG2-UM-03