ADC MM701G2, MM702G2 user manual Verify Connectivity, Save Changes-CO LAN

April 14, 2006 Chapter 7: Implementing a Point-to-Point LAN Extension

Step	Action
5	Select Save Changes on the menu bar to access the Save Changes page.

Figure 7-12. Save Changes—CO LAN

6 Click Save to save the configuration to flash memory.

VERIFY CONNECTIVITY

After you have performed each of the previous configuration changes, verify back-to-back communication by passing traffic over the WAN session. For example, set up a PC on the LAN-side of the Remote modem and another PC on the LAN-side of the Central-Office modem. Then, transfer a file or ping between the two PCs. This generates traffic and tests connectivity.

Step Action

1On the front panel of one of the modems, check the status of the SYNC LED. If it is blinking, it is attempting to establish communication with the other modem. If it is on solid green, it has already synchronized its connection with the other modem. See “LED Status Indications” on page 1-5for further definitions of LEDs indications.

MM70xG2-UM-03 7-9