ADC MM701G2, MM702G2 user manual List of Figures

List of Figures

Figure 1-1. Remove the Modem	1-1
Figure 1-2. Set the MDI/MDI-X Switch	1-3
Figure 1-3. Rear Panel Connections	1-4
Figure 1-4. Reboot the Modem with the Reset Button	1-6
Figure 2-1. TCP/IP Properties	2-1
Figure 2-2. Internet Options	2-2
Figure 2-4. Location Bar Field	2-3
Figure 2-3. LAN Settings	2-3
Figure 2-5. Enter User Name and Password	2-4
Figure 2-6. System Status Page	2-4
Figure 3-1. LAN Configuration	3-1
Figure 3-2. DNS Relay Mode Page	3-3
Figure 3-3. DNS Enable Relay Page	3-3
Figure 3-4. DHCP Server Mode Page	3-4
Figure 3-5. Internet Protocol (TCP/IP) Properties	3-5
Figure 3-6. DHCP Server Page	3-5
Figure 3-7. DHCP Server Page	3-6
Figure 4-1. WAN Configuration Page	4-2
Figure 4-2. RFC 1483 Bridged Session	4-3
Figure 4-3. RFC 1483 Routed Session	4-5
Figure 4-4. PPPoA Routed Session	4-7
Figure 4-5. WAN Configuration	4-10
Figure 4-6. WAN Sessions (Routing)	4-11
Figure 4-7. WAN Sessions (PPP)	4-12
Figure 5-1. Users’ List	5-1
Figure 5-2. Add New User	5-2
Figure 5-3. User Configuration	5-3
Figure 5-4. Default Gateway	5-4
Figure 5-5. Static Routes	5-5
Figure 5-6. Add a New Route	5-6
Figure 5-7. Delete Route	5-7
Figure 5-8. SNMP Community List	5-8
Figure 5-9. Add New Community	5-9
Figure 5-10.Delete SNMP Community	5-10
Figure 5-11.Spanning Tree Configuration	5-11
Figure 5-12.Save Changes	5-12
Figure 5-13.Configuration Save Complete	5-13

MM70xG2-UM-03 vii