
ABOUT THIS MANUAL
INTRODUCTION
This manual applies to the ADC® Megabit Modem® versions MM701G2 and MM702G2. These modems can be used in two types of applications:
•as an endpoint (CPE) to a DSLAM for Internet and other broadband connection through a service provider
•as a LAN extension by implementing a
ORGANIZATION
To complete an endpoint installation for an MM701G2 or MM702G2 modem, follow the configuration instructions in all chapters of this manual, with the exception of Chapter 7: Implementing a
To complete a
•Chapter 1: Installation
•Chapter 2: Accessing the Web Interface for Modem Management
•Chapter 5: Configuring System Parameters
•Chapter 7: Implementing a
•Chapter 8: Configuring NAT
After configuring the modem(s) for your application, monitor its status and perform other management functions using the instructions in Chapter 9: Managing the Modem. If you choose to manage the modem through the console port, use the instructions in Appendix A: Command Line Interface Access.
INTENDED AUDIENCE
This manual is intended for anyone who installs, configures, and manages the ADC Megabit Modem versions MM701G2 and MM702G2.
CONVENTIONS
The following style conventions and terminology are used throughout this guide.
Element | Meaning |
|
|
Bold font | Text that you must input exactly as shown (e.g., type 1 for card 1), menu buttons |
| (e.g., ACCEPT SHELF OPTIONS) or menu screen options (e.g., ALARMS screen) that |
| you must select |
|
|
Italic font | Variables that you must determine before inputting the correct value (e.g., Password ) |
|
|
Monospace font | References to screen prompts (e.g., Invalid Password...Try Again:.) |
|
|
|
|
Reader Alert | Meaning |
|
|
| Alerts you to supplementary information |
|
|
IMPORTANT | Alerts you to supplementary information that is essential to the completion of a task |
!
xiii |