![](/images/new-backgrounds/1299610/299610101x1.webp)
April 14, 2006 | Chapter 5: Configuring System Parameters |
Step | Action |
2To add a new SNMP community, do the following:
a.On the SNMP Community List page, click Add a new community. The following dialog is displayed (Figure
Figure 5-9. Add New Community
b. Enter the following information for the SNMP community.
–Name
Identification for this SNMP community. All keyboard characters are allowed for this name, up to a maximum of 80 characters. You must add a community name in this field to later edit or delete the SNMP community. This name in the SNMP Community List table provides the link for editing or deleting the entry.
–Access Privilege
The access allowed to this SNMP community. Accesses are either Read
c.Click Add. The new entry is added to and is displayed in the SNMP Community List table (see page