USB Drive Requirements, ReadySHARE Access | NETGEAR D6200-100NAS

D6200 WiFi DSL Modem Router

USB Drive Requirements

The WiFi DSL modem router works with 1.0 and 1.1 (USB Full Speed) and 2.0 (USB High Speed) standards. The approximate USB bus speeds are shown in the following table. Actual bus speeds can vary, depending on the CPU speed, memory, speed of the network, and other variables.

Table 9. USB drive speeds

Bus

USB 1.1

USB 2.0

Speed/Sec

12Mbits

480Mbits

The WiFi DSL modem router should work with most USB-compliant external flash and hard drives. For the most up-to-date list of USB drives supported by the WiFi DSL modem router, visit:

http://kbserver.netgear.com/readyshare

The WiFi DSL modem router supports both read and write access for FAT16, FAT32, and NTFS.

Note: Some USB external hard drives and flash drives require drivers to be loaded into the computer before the computer can access the USB device. Such USB devices do not work with the WiFi DSL modem router.

ReadySHARE Access

Once you have set up your WiFi DSL modem router, you can connect any USB storage device and share the contents with other users on your network.

You can access your USB device in any of the following ways:

•On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, select Start > Run and enter \\readyshare in the dialog box. Click OK.

•On Windows 7, Windows XP, Windows Vista, and Windows 2000 systems, open either Internet Explorer or Safari, and enter \\readyshare in the address bar.

•On Mac OS X (version 10.2 or later), enter smb://readyshare in the address bar.

•In My Network Places, enter \\readyshare in the address bar.

USB Storage

61

Image 61

NETGEAR D6200-100NAS user manual USB Drive Requirements, ReadySHARE Access

Contents

D6200 WiFi DSL Modem Router Trademarks Support Contents Netgear genie Advanced Home Security Appendix a Supplemental Information Hardware Setup Product Highlights Product Specifications Weee Unpack Your New Router Box contents Hardware Setup Label Hardware Features AC power Adsl line USB port Gigabit Ethernet Power LAN portsWAN port Reset button Back Panel Front Panel Power DSL Internet Wireless USB D6200 WiFi DSL Modem Router Power On/Off LED D6200 WiFi DSL Modem Router Wireless LED Side Panel WiFi On/Off button WPS button Adsl Microfilters Position Your Wireless Router Two-Line Adsl Microfilter Included One-Line Adsl Microfilter Not IncludedSummary Cable/fiber Modem Power Cable Your D6200 WiFi DSL Modem RouterBrowser Verify the Cabling Get Started with Netgear genie Types of Logins and Access Prepare to Set Up the WiFi DSL Modem RouterWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp  To use Netgear genie to set up your WiFi DSL modem router Netgear genie SetupBrowse to http//routerlogin.net Upgrade WiFi DSL Modem Router Firmware Use Netgear genie after Installation WiFi DSL Modem Router Dashboard Basic Home Screen Wi-Fi Protected Setup WPS Method Add Wireless Devices or Computers to Your NetworkManual Method  To connect manually  To use WPS to join the wireless network Netgear genie Basic Settings Internet Setup Screen Fields Internet Basic Settings To view or change ISP information Internet IP Address Does Your ISP Require a Login? Answer either yes or no Attached Devices Parental Controls Basic Wireless Settings  To view or change basic wireless settings Wireless Settings Screen Fields Wireless Network Change WPA Security Option and Passphrase Wireless Security Options Guest Networks  To set up a guest network Netgear genie App  To install the genie mobile app You can use the following QR codes to speed up this process Netgear genie Advanced Home Netgear genie Advanced Home Setup Wizard D6200 WiFi DSL Modem Router  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardSelect either Push Button or PIN Number  To use the VPN Wizard Select Advanced VPN Wizard VPN Wizard D6200 WiFi DSL Modem Router Setup Menu  To configure Adsl Select Advanced Setup Adsl Settings Adsl Setup  To configure the WAN Select Advanced Setup WAN Setup WAN Setup Default DMZ Server Common MTU sizes Change the MTU Size  To change the MTU size Select Advanced Setup WAN Setup LAN Setup  To change the LAN settings Select Advanced Setup LAN Setup LAN Setup Screen Settings Use Router as Dhcp Server Use the WiFi DSL Modem Router as a Dhcp Server Address Reservation  To reserve an IP address Select Advanced Setup LAN Setup To edit or delete a reserved address entry  To configure QoS Select Advanced Setup QoS Setup Quality of Service Setup Add a Priority Rule Click Set Up QoS Rule Priority Policies for Applications and Online Games Priority Policies for MAC Addresses Priority Policies for Ethernet LAN Ports USB Storage USB Drive Requirements ReadySHARE Access  To share files with your friends and family File-Sharing Scenarios Share Large Files over the Internet USB Storage Basic Settings Add or Edit a Network Folder USB Storage Advanced Settings D6200 WiFi DSL Modem Router Media Server Settings Specify Approved USB Devices Connect to the USB Drive from a Remote Computer Access the WiFi DSL Modem Router USB Drive Remotely UsingReadySHARE Cloud Select the Allow only approved devices check box D6200 WiFi DSL Modem Router Click Register Safely Remove a USB Drive ReadySHARE Printer  To download ReadySHARE Printer Download the ReadySHARE Printer Utility  To install the Netgear USB Control Center Install the Netgear USB Control Center Set Up the Netgear USB Control Center D6200 WiFi DSL Modem Router Configure the Netgear USB Control Center Select Tools Configuration  To configure the Netgear USB Control Center Netgear USB Control Center Manage USB Print and Scan Jobs  To launch the Netgear USB Control Center Use the Scan Feature of a Multifunction USB Printer  To use the scan feature of a multifunction USB printer Security Select Advanced Security Block Sites Keyword Blocking of Http Traffic To delete a keyword or domain Click Delete Keyword  To specify a trusted computer Firewall Rules D6200 WiFi DSL Modem Router WAN Servers LAN UsersLog TCP UDP TCP/UDP Add Custom Services to Allow or Block Schedule for Firewall Rules Security Event Email Notifications D6200 WiFi DSL Modem Router Administration Upgrade the WiFi DSL Modem Router Firmware Router Information View WiFi DSL Modem Router StatusLAN Port Internet Port Guest Network 2.4 GHz and 5 GHz Wireless Settings 2.4 GHz and 5 GHz Connection Statistics Reboot the Router Click Set Interval Connection Status View VPN Status  To view the logs Select Advanced Administration Logs View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration File Restore Configuration Settings Set PasswordDo not interrupt the reboot process Erase  To set up password recovery Diagnostics 105 Fine -tune your network Advanced Settings Advanced Wireless Settings Turn Off Radio By Schedule WPS Settings Wireless Access List Click the Set Up Access List Click Turn Access Control On Basic Wireless Settings on Wireless Repeating Function WDS Wireless Repeating Function Set Up the Base Station  To configure the WiFi DSL modem router as a repeater unit Set Up a Repeater UnitSelect Advanced Advanced Wireless Repeating Function Port Forwarding and Port Triggering Remote Computer Access Basics Destination port number Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Add a Custom Service Click Edit Service or Delete Service Click the Add Custom ServiceEdit or Delete a Port Forwarding Entry Application Example Making a Local Web Server Public Universal Plug and Play on Set Up Port Triggering 123 Dynamic DNS Click Add Service Select the Use a Dynamic DNS Service check box Static Routes 127 128 Remote Management 130 Universal Plug and Play IPv6 Click Restart Counter Now Traffic Meter 134 VPN Policies Device Mode 136 Add or Edit an Auto VPN Policy 138 Fully Qualified Domain Name. Your domain name IKEParameters Add or Edit a Manual VPN Policy 141 Troubleshooting Network Settings Wireless SettingsQuick Tips Sequence to Restart Your Network Power LED Stays Red Power LED Is Off or BlinkingTroubleshoot with the LEDs LEDs Never Turn Off Wireless LED Is OffInternet or Ethernet Port LEDs Are Off Push N Connect WPS Button Does Not Work Cannot Log In to the Router Cannot Access the Internet Troubleshoot PPPoE Select Administration Router Status Click Connection StatusTroubleshoot Internet Browsing  To troubleshoot a PPPoE connection Changes Not Saved Wireless ConnectivityIncorrect Date or Time Troubleshoot Your Network Using the Ping Utility Restore the Factory Settings and PasswordTest the LAN Path to Your Router Test the Path from Your Computer to a Remote Device 152 Supplemental Information Factory Settings 154 D6200 Router specifications Technical Specifications Regulatory Compliance Information Netgear Dual Band WirelessEurope EU Declaration of Conformity FCC Requirements for Operation in the United States Industry Canada FCC Caution Avertissement Important Note Radiation Exposure StatementInterference Reduction Table Index 160 161 162