D6200 WiFi DSL Modem Router

Back Panel

The back panel has the Power On/Off button and port connections shown in the figure:

1.ADSL line

2.USB port

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Gigabit Ethernet

 

 

 

7. Power

LAN ports

 

 

 

On/Off button

 

 

 

 

 

6. AC power

 

4. Gigabit Ethernet

 

 

adapter input

 

WAN port

5. Reset button

 

 

 

 

Figure 3. Back panel port connections

Viewed from left to right, the back panel contains the following elements:

1.RJ-11 asynchronous DSL (ADSL) port for connecting the WiFi DSL modem router to an ADSL line

Note: An ADSL port can send data over an ADSL line at one speed and receive it at another speed.

2.USB port for connecting USB storage devices like flash drives, hard drives, or USB printers

3.Four Gigabit Ethernet RJ-45 LAN ports for cabling the WiFi DSL modem router to the local computers

4.One Gigabit Ethernet WAN port for connecting the WiFi DSL modem router to a fiber or cable modem

Note: You can use either the ADSL or Gigabit Ethernet port for WAN connectivity.

5.Reset button

For information about the Reset button and the factory setting values, see Factory Settings on page 153.

6.Power On/Off button

Hardware Setup

13

Page 13
Image 13
NETGEAR D6200-100NAS user manual Back Panel, Adsl line USB port Gigabit Ethernet Power LAN ports, AC power, Adapter input