D6200 WiFi DSL Modem Router
USB Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device.
To configure the advanced USB storage settings:
1. Select Advanced > USB Storage > Advanced Settings.
2.Configure the following settings:
•Network Device Name. The default is ReadySHARE. This name is used to access the USB device connected to the WiFi DSL modem router.
•Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup name is displayed here. The name works only in an operating system that supports NetBIOS, such as Microsoft Windows.
•Access Method. Select any of the following check boxes to enable the access methods.
-Network Connection. Enabled by default, this connection allows all users on the LAN to have access to the USB drive.
-HTTP. Enabled by default. You can type http://readyshare.routerlogin.net/shares to access the USB drive.
-HTTP (via internet). Disabled by default. If you select this check box, remote users can type http://<public IP address>/shares (for example, http://1.1.10.102/shares) or a URL domain name to access the USB drive over the Internet. This feature supports file uploading only.
-FTP. Disabled by default.
-FTP (via internet). Disabled by default. If you select this check box, remote users can access the USB drive through FTP over the Internet. This feature supports both downloading and uploading of files.
USB Storage
66
