LAN Setup | NETGEAR D6200-100NAS specification

D6200 WiFi DSL Modem Router

Table 8. Common MTU sizes (continued)

MTU

1436

1400

576

Application

Used in PPTP environments or with VPN.

Maximum size for AOL DSL.

Typical value to connect to dial-up ISPs.

To change the MTU size:

1.Select ADVANCED > Setup > WAN Setup.

2.In the MTU Size field, enter a new size from 64 through 1500.

3.Click Apply.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The WiFi DSL modem router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The WiFi DSL modem router’s default LAN IP configuration is:

•LAN IP address. 192.168.0.1

•Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks and should be suitable for most applications. If your network requires a different IP addressing scheme, make changes in the LAN Setup screen.

Note: If you change the LAN IP address of the WiFi DSL modem router while connected through the browser, you are disconnected. You have to open a new connection to the new IP address and log in again.

NETGEAR genie ADVANCED Home

52

Image 52

NETGEAR D6200-100NAS user manual LAN Setup,  To change the MTU size Select Advanced Setup WAN Setup

Contents

D6200 WiFi DSL Modem Router Support Trademarks Contents Netgear genie Advanced Home Security Appendix a Supplemental Information Hardware Setup Product Highlights Product Specifications Weee Box contents Hardware Setup Unpack Your New Router Hardware Features Label Adsl line USB port Gigabit Ethernet Power LAN ports AC powerWAN port Reset button Back Panel Power DSL Internet Wireless USB Front Panel D6200 WiFi DSL Modem Router Power On/Off LED D6200 WiFi DSL Modem Router Wireless LED WiFi On/Off button WPS button Side Panel Position Your Wireless Router Adsl Microfilters Two-Line Adsl Microfilter Included One-Line Adsl Microfilter Not IncludedSummary Cable/fiber Modem Power Cable Your D6200 WiFi DSL Modem RouterBrowser Verify the Cabling Get Started with Netgear genie Prepare to Set Up the WiFi DSL Modem Router Types of Logins and AccessWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp  To use Netgear genie to set up your WiFi DSL modem router Netgear genie SetupBrowse to http//routerlogin.net Use Netgear genie after Installation Upgrade WiFi DSL Modem Router Firmware WiFi DSL Modem Router Dashboard Basic Home Screen Add Wireless Devices or Computers to Your Network Wi-Fi Protected Setup WPS MethodManual Method  To connect manually  To use WPS to join the wireless network Netgear genie Basic Settings Internet Setup Screen Fields Internet Basic Settings To view or change ISP information Does Your ISP Require a Login? Answer either yes or no Internet IP Address Attached Devices Basic Wireless Settings Parental Controls Wireless Settings Screen Fields  To view or change basic wireless settings Wireless Network Wireless Security Options Change WPA Security Option and Passphrase  To set up a guest network Guest Networks  To install the genie mobile app Netgear genie App You can use the following QR codes to speed up this process Netgear genie Advanced Home Netgear genie Advanced Home Setup Wizard D6200 WiFi DSL Modem Router  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardSelect either Push Button or PIN Number VPN Wizard  To use the VPN Wizard Select Advanced VPN Wizard D6200 WiFi DSL Modem Router Setup Menu Adsl Setup  To configure Adsl Select Advanced Setup Adsl Settings WAN Setup  To configure the WAN Select Advanced Setup WAN Setup Default DMZ Server Change the MTU Size Common MTU sizes LAN Setup  To change the MTU size Select Advanced Setup WAN Setup LAN Setup Screen Settings  To change the LAN settings Select Advanced Setup LAN Setup Use the WiFi DSL Modem Router as a Dhcp Server Use Router as Dhcp Server Address Reservation  To reserve an IP address Select Advanced Setup LAN Setup To edit or delete a reserved address entry Quality of Service Setup  To configure QoS Select Advanced Setup QoS Setup Click Set Up QoS Rule Add a Priority Rule Priority Policies for Applications and Online Games Priority Policies for Ethernet LAN Ports Priority Policies for MAC Addresses USB Storage ReadySHARE Access USB Drive Requirements File-Sharing Scenarios  To share files with your friends and family Share Large Files over the Internet USB Storage Basic Settings Add or Edit a Network Folder USB Storage Advanced Settings D6200 WiFi DSL Modem Router Media Server Settings Specify Approved USB Devices Access the WiFi DSL Modem Router USB Drive Remotely Using Connect to the USB Drive from a Remote ComputerReadySHARE Cloud Select the Allow only approved devices check box D6200 WiFi DSL Modem Router Click Register Safely Remove a USB Drive ReadySHARE Printer Download the ReadySHARE Printer Utility  To download ReadySHARE Printer Install the Netgear USB Control Center  To install the Netgear USB Control Center Set Up the Netgear USB Control Center D6200 WiFi DSL Modem Router Configure the Netgear USB Control Center  To configure the Netgear USB Control Center Select Tools Configuration Manage USB Print and Scan Jobs Netgear USB Control Center Use the Scan Feature of a Multifunction USB Printer  To launch the Netgear USB Control Center  To use the scan feature of a multifunction USB printer Security Keyword Blocking of Http Traffic Select Advanced Security Block Sites To delete a keyword or domain Click Delete Keyword Firewall Rules  To specify a trusted computer D6200 WiFi DSL Modem Router WAN Servers LAN UsersLog Add Custom Services to Allow or Block TCP UDP TCP/UDP Schedule for Firewall Rules Security Event Email Notifications D6200 WiFi DSL Modem Router Administration Upgrade the WiFi DSL Modem Router Firmware View WiFi DSL Modem Router Status Router InformationLAN Port Internet Port Wireless Settings 2.4 GHz and 5 GHz Guest Network 2.4 GHz and 5 GHz Reboot the Router Connection Statistics Connection Status Click Set Interval View VPN Status View Logs of Web Access or Attempted Web Access  To view the logs Select Advanced Administration Logs Manage the Configuration File Back Up Settings Set Password Restore Configuration SettingsDo not interrupt the reboot process Erase  To set up password recovery Diagnostics 105 Advanced Settings Fine -tune your network Advanced Wireless Settings WPS Settings Turn Off Radio By Schedule Wireless Access List Click the Set Up Access List Click Turn Access Control On Wireless Repeating Function WDS Basic Wireless Settings on Wireless Repeating Function Set Up the Base Station Set Up a Repeater Unit  To configure the WiFi DSL modem router as a repeater unitSelect Advanced Advanced Wireless Repeating Function Port Forwarding and Port Triggering Remote Computer Access Basics Port Triggering to Open Incoming Ports Destination port number Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Add a Custom Service Click the Add Custom Service Click Edit Service or Delete ServiceEdit or Delete a Port Forwarding Entry Application Example Making a Local Web Server Public Set Up Port Triggering Universal Plug and Play on 123 Click Add Service Dynamic DNS Select the Use a Dynamic DNS Service check box Static Routes 127 128 Remote Management 130 Universal Plug and Play IPv6 Traffic Meter Click Restart Counter Now 134 Device Mode VPN Policies 136 Add or Edit an Auto VPN Policy 138 Fully Qualified Domain Name. Your domain name IKEParameters Add or Edit a Manual VPN Policy 141 Troubleshooting Wireless Settings Network SettingsQuick Tips Sequence to Restart Your Network Power LED Stays Red Power LED Is Off or BlinkingTroubleshoot with the LEDs Wireless LED Is Off LEDs Never Turn OffInternet or Ethernet Port LEDs Are Off Push N Connect WPS Button Does Not Work Cannot Log In to the Router Cannot Access the Internet Select Administration Router Status Click Connection Status Troubleshoot PPPoETroubleshoot Internet Browsing  To troubleshoot a PPPoE connection Changes Not Saved Wireless ConnectivityIncorrect Date or Time Troubleshoot Your Network Using the Ping Utility Restore the Factory Settings and PasswordTest the LAN Path to Your Router Test the Path from Your Computer to a Remote Device 152 Factory Settings Supplemental Information 154 Technical Specifications D6200 Router specifications Netgear Dual Band Wireless Regulatory Compliance InformationEurope EU Declaration of Conformity FCC Requirements for Operation in the United States FCC Caution Industry Canada Avertissement Important Note Radiation Exposure StatementInterference Reduction Table Index 160 161 162