ADC MM702G2, MM701G2 user manual Change Spanning Tree Setting, Delete Snmp Community

Chapter 5: Configuring System Parameters April 14, 2006

Step Action

3To modify or delete an SNMP community, do the following:

a.From the SNMP Community List table, select the SNMP community Name. The following dialog is displayed (Figure 5-10).

Figure 5-10. Delete SNMP Community

b. Do one of the following:

–Change the Access Privilege, then click Apply.

–Click Delete to remove the static SNMP community.

CHANGE SPANNING TREE SETTING

Spanning tree eliminates loops in a LAN topology, ensuring there is only one path (or link) between any two nodes in a bridged network. Use spanning tree protocol (STP) when RFC 1483-Bridge protocol is assigned to either or both of the following:

•WAN sessions (see “Configure a New WAN Session” on page 4-2)

•LAN port and the LAN has more than one device (PCs and servers, for example) and those devices have more than one physical path connecting them.

5-10 MM70xG2-UM-03