Aastra Telecom 41-001343-02 Notification When Incorrect Network Settings Entered, Tion, Servers

Administrator Level Options

Notification When Incorrect Network Settings Entered

If an Administrator enters incorrect network settings over the IP Phone UI or the Aastra Web UI, such as:

•A 0.0.0.0 entered as values for the IP Address, Subnet Mask, and Gateway parameters,

•IP Address and Gateway IP address parameter values entered exactly the same,

•Gateway IP address and the IP address parameter values configured not on the same subnet,

the UI will immediately notify the Administrator with a specific message that an incorrect value was entered.

Basic Network Settings

If Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phone automatically configures all of the Network set- tings. If the phone cannot populate the Network settings, or if DHCP is disabled, you can set the Network options manu- ally.

Parameter In	Parameter in	Parameters in Configuration	Description
IP Phone UI	Aastra Web UI	Files
DHCP	DHCP	dhcp	Enables or disables DHCP. Enabling DHCP populates the
			required network information. The DHCP server serves the
			network information that the IP phone requires. If the IP phone
			is unable to get any required information, then you must enter
			it manually. DHCP populates the following network informa-
			tion:
			IP Address, Subnet Mask, Gateway, Domain Name System
			(DNS) servers, TFTP, HTTP HTTPS, and FTP servers, and Timer
			servers.

			Note:
			For DHCP to automatically populate the IP address or qualified
			domain name for the TFTP server, your DHCP server must sup-
			port Option 66. The IP phones also support Option 60 and 43.
			For more information, see “DHCP” on page 4-3.
IP Address	IP Address	ip	IP address of the IP phone. To assign a static IP address, disable
			DHCP.
			For more information, see “Configuring Network Settings
			Manually” on page 4-18.
Subnet Mask	Subnet Mask	subnet mask	Subnet mask defines the IP address range local to the IP
			phone. To assign a static subnet mask, disable DHCP.
			For more information, see “Configuring Network Settings
			Manually” on page 4-18.
Gateway	Gateway	default gateway	The IP address of the network’s gateway or default router IP
			address. To assign a static Gateway IP address, disable DHCP.
			For more information, see “Configuring Network Settings
			Manually” on page 4-18.
Primary DNS	Primary DNS	dns1	Primary DNS server IP address. For any of the IP address set-
			tings on the IP phone a domain name value can be entered
			instead of an IP address. With the help of the DNS servers the
			domain names for such parameters can then be resolved to
			their corresponding IP addresses.
			To assign static DNS addresses, disable DHCP.
			Note:
			If a host name is configured on the IP phone, you must also set
			a DNS.
			For more information, see “Configuring Network Settings
			Manually” on page 4-18.

41-001343-02 REV04 – 05.2014 3-28