Aastra Telecom 41-001343-02 manual Incoming Intercom Settings

Operational, Basic, and Advanced Parameters

Parameter –	Configuration Files
sip intercom prefix code	aastra.cfg, <model>.cfg, <mac>.cfg
Description	The prefix to add to the phone number for server-side outgoing Intercom calls. This
	parameter is required for all server-side Intercom calls.

	Note:
	The example below shows *96 for the prefix code which is used for Sylantro servers.
Format	String
Default Value	Not Applicable
Range	Not Applicable
Example	sip intercom prefix code: *96

Parameter –	Configuration Files
sip intercom line	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the line for which the IP phone uses the configuration from, when making the
	Intercom call. The IP phone uses the first available line for physically making the call but
	uses the configuration from the line you set for this parameter.
	Note:
	The "sip intercom type" parameter must be set with the Server-Sideoption to enable the
	"sip intercom line" parameter.
Format	Integer
Default Value	1
Range	Line 1 through 9
Example	sip intercom line: 1

Incoming Intercom Settings

Parameter –	Configuration Files
sip allow auto answer	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Enables or disables the IP phone to allow automatic answering for an Intercom call. If
	auto-answer is enabled on the IP phone, the phone plays a tone to alert the user before
	answering the intercom call. If auto-answer is disabled, the phone treats the incoming
	intercom call as a normal call.
Format	Boolean
Default Value	1	(true)
Range	0	(false - do not allow auto-answer)
	1	(true - allow auto-answer)
Example	sip allow auto answer: 0

A-145 41-001343-02 REV04 – 05.2014