Aastra Telecom 41-001343-02 manual Configuring Polling Action URI via the Configuration Files

Operational Features

Aastra Web UI

12.(Optional) You can poll a URI at specific intervals on the phones. For more information about polling Action URIs, see “Polling Action URIs” on page 5-252.

13.Click Save Settings to save your changes.

Polling Action URIs

Another way to reach a phone behind a NAT/firewall is to have the phone make an XML call at periodic intervals. An Administrator can use the action uri poll parameter that commands the phone to perform an XML call at configurable intervals.

An Administrator can specify the URI to be called and specify the interval between polls using the configuration files or the Aastra Web UI. Configuration of this feature is dynamic (no reboot required).

Configuring Polling Action URI via the Configuration Files

Use the following parameters to configure the polling Action URI on the IP Phones.

•action uri poll

•action uri poll interval

Configuration Files

For the specific parameter you can set in the configuration files, see Appendix A, the section, “Polling Action URI Settings” on page A-119.

Configuring Polling Action URI via the Aastra Web UI

Use the following procedure to configure polling Action URI using the Aastra Web UI.

Aastra Web UI

1.Click on Advanced Settings->Action URI.

2.In the “Poll” field, enter a URI to be called every "action uri pool interval" seconds. Enter the value in a URI format. For example, http://myserver.com/myappli.xml.

5-254 41-001343-02 REV04 – 05.2014