Aastra Telecom 41-001343-02 manual Display on the idle screen at all

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key

Parameter –	Configuration Files
softkeyN states	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Displays the status of the phone when a softkey is pressed. You can enter multiple values
	(idle, connected, incoming, outgoing, busy) for the "softkeyN state" parameter.
	You must associate the softkeyN state parameter with a specific softkey. In the following
	example, the softkeyN states parameter is associated with softkey 12:
	softkey12 type: speeddial
	softkey12 label: voicemail
	softkey12 value *89
	softkey12 states: outgoing
	Note:
	The IP phone idle screen condenses the softkeys. So in the previous example, softkey 12
	will appear in position 1 if no other softkeys are set. A softkey type of "empty" does not
	display on the idle screen at all.
Format	Text
Default Value	For softkey type none, flash, phonelock, paging:
	All states disabled
	For softkey types line, dnd, speeddial, blf, list, dcp, xml, lcr, callforward, blfxfer,
	speeddialxfer, speeddialconf, speeddialmwi, directory, filter, callers, redial, conf, xfer,
	icom, services, empty:
	idle, connected, incoming, outgoing, busy
	For softkey type flash:
	All states disabled
	For softkey type park, sprecode:
	connected
	For softkey type pickup:
	idle, outgoing
	For softkey type acd:
	idle
Range	Valid values are:
	idle: The phone is not being used.
	connected: The line currently being displayed is in an active call (or the call is on hold)
	incoming: The phone is ringing.
	outgoing: The user is dialing a number, or the far-end is ringing.
	busy: The current line is busy because the line is in use or the line is set as “Do Not Dis-
	turb”.
	Note:
	For softkey type, Pickup, values can be: just idle, just outgoing, or idle outgoing.
Example	softkey1 states: idle incoming outgoing
	softkey2 states: connected

A-163 41-001343-02 REV04 – 05.2014