Aastra Telecom 41-001343-02 manual Picture ID Feature

Operational Features

Switching the 6867i IP Phone’s Home/Idle Screen Mode

Use the following procedures to switch the 6867i IP phones home/idle screen mode.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Configurable Home/Idle Screen Modes” on page A-55.

Picture ID Feature

Note:

Applicable to the 6739i and 6867i IP Phones only.

The Picture ID feature on the 6739i and 6867i shows a picture ID of a caller on the LCD for all of the following events on the phone:

•Incoming Calls (matched to Caller ID numbers)

•Outgoing Calls (matched to dialed numbers)

•Directory entries

•Callers List entries

•Redial List entries

Your Administrator stores the pictures in a centralized picture repository. The pictures are dynamically retrieved from the centralized server for each call and then locally cached in the phone to reduce network traffic.

If there is no picture on the central server for the dialed number and/or Caller Id number, and Directory, Callers List, and/or Redial List entry, the generic blue figure image is shown.

Generic

Blue Image

Pictures must be in “.png” format, 150pixels wide x 200pixels tall, and in 24-bit color (the 6867i also supports 32-bit color). The filenames for pictures must be stored using the phone number as the filename (for example, 9995551234.png). Enabling and disabling Picture ID on the phone can be done by an Administrator using the configura- tion files only

Note:

The Picture ID feature supports the use of TFTP, FTP, HTTP, and HTTPS protocols when downloading pictures.

Enabling/Disabling the Picture ID on the Phone Using the Configuration Files

Use the following parameter to enable/disable Picture ID on the phone.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Picture ID Feature” on page A-56.

5-32 41-001343-02 REV04 – 05.2014