Aastra Telecom 41-001343-02 manual Hard Key Settings for

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters

Hard Key Settings for 6867i

Parameter–	Configuration Files
hardkeyN type	aastra.cfg, <model>.cfg, <mac>.cfg
Description	The type of key to which you would like to change the hard key. Valid types include:
	• none - Indicates no setting for the key.
	• line - Indicates the key is configured for line use.
	• speeddial - Indicates the key is configured for speeddial use. You can configure a key to
	speeddial a specific number by pressing that key. Optionally, you can also configure a
	Speeddial key to dial prefix numbers. With this option, the prefix numbers automati-
	cally dial when you press the key, and the phone waits for you to enter the remaining
	numbers to dial.
	Note: When there is an active call, the Speeddial keys send DTMF digits through the
	active voice path. To dial out, you have to first put the active call on hold and then press
	the Speeddial key.
	• dnd - Indicates the key is configured for Do Not Disturb on the phone.
	• blf - Indicates the key is configured for Busy Lamp Field (BLF) use.
	• list - Indicates the key is configured for BLF/List use.
	• acd - (for Sylantro Servers only) Indicates the key is configured for Auto Call Distribu-
	tion. The ACD feature allows the Sylantro server to distribute calls from a queue to reg-
	istered IP phone users (agents).
	• xml - Indicates the key is configured to accept an XML application for accessing cus-
	tomized XML services. You can also specify an XML softkey URL for this option.
	• flash - Indicates the key is set to generate a flash event when it is pressed. The IP phone
	generates flash events only when a call is connected and there is an active RTP stream
	(for example, when the call is not on hold).
	• sprecode - Indicates the key is configured to automatically activate specific services
	offered by the server. For example, if the sprecode value of *82 is configured, then by
	pressing the softkey, *82 automatically activates a service provided by the server.
	• park - Indicates the key is configured to park incoming calls when pressed.
	• pickup - Indicates the key is configured to pick up parked calls when pressed.
	• lcr - Indicates the key is configured for the Last Call Return function when pressed.
	• callforward - Indicates the key is configured for accessing the Call Forward features on
	the phone. A Call Forwarding Mode must be enabled to use this key. “Account” mode is
	the default.
	• blfxfer - Indicates the key is configured to transfer calls AND configured for BLF on a sin-
	gle key.
	• speeddialxfer - Indicates the key is configured to transfer calls AND configured for
	speeddialing to a specific number.
	• speeddialconf - Indicates the key is configured to be used as a Speeddial key AND as a
	Conference key.
	• directory - Indicates the key is configured to access the Directory List.
	• callers - Indicates key is configured to access the Callers List.
	• redial - Indicates key is configured to access the Redial List.
	• conf - Indicates the key is configured as a Conference key.
	• xfer- Indicates the key is configured as a Transfer key for transferring calls.
	• icom - Indicates the key is set to be used as the Intercom key.
	• phonelock - Indicates the key is set to be used to lock/unlock the phone.
	• paging - Indicates the key is set for Group Paging on the phone. Pressing this key auto-
	matically sends a Real Time Transport Protocol (RTP) stream to pre-configured multicast
	address(es) without involving SIP signaling.
Format	Text
Default Value	N/A

41-001343-02 REV04 – 05.2014 A-182