Aastra Telecom 41-001343-02 After 60 seconds determined by this parameter, Preferred line timeout

Operational, Basic, and Advanced Parameters

Parameter –	Configuration Files
call hold reminder frequency	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the time interval, in seconds, between each ring splash sound on the active line. For
	example, if a call comes into Line 1, and then a call comes into Line 2 and you answer Line 2,
	Line 1 is automatically placed on hold. While on the active Line 2, after 7 seconds, a ring
	splash audio sounds on the line reminding you that the call on Line 1 is still on hold (deter-
	mined by the “call hold reminder timer” parameter), and then the ring splash is heard again
	after 60 seconds (determined by this parameter).
	Notes:
	• You must enable the “call hold reminder” and/or “call hold reminder during active calls”
	parameter(s), and the “call hold reminder timer” parameter, for this parameter to work.
	• A value of “0” prevents additional rings.
Format	Integer
Default Value	60
Range	0-4294967295
Example	call hold reminder frequency: 50

Preferred Line and Preferred Line Timeout

Parameter–	Configuration Files
preferred line	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the preferred line to switch focus to when incoming or outgoing calls end on the
	phone.
Format	Integer
Default Value	1
Range	0 (none - disables the preferred line focus feature)
	1-9
Example	preferred line: 2

Parameter–	Configuration Files
preferred line timeout	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the time, in seconds, that the phone switches back to the preferred line after a call
	(incoming or outgoing) ends on the phone, or after a duration of inactivity on an active line.
Format	Integer
Default Value	0 (the phone returns the line to the preferred line immediately)
Range	0-999
Example	preferred line timeout: 30

41-001343-02 REV04 – 05.2014 A-124