Aastra Telecom 41-001343-02 manual # Configuration Server Settings

Sample Configuration Files

# NAT Settings

#=============

#Option 1:

#If you are using a session border controller, you should set the

#outbound proxy to the session border controller address

#sip outbound proxy: sbc.aastra.com

#sip outbound proxy port: 0# a value of 0 enables SRV

# lookups for the address of

# the proxy.

#Option 2:

#If you know the public IP address of your NAT device and have

#opened up a port for the SIP messages then you can statically

#assign this information.

#sip nat ip: 67.123.122.90

#sip nat port: 5890

# Additional Network Settings

#============================

#sip rtp port: 3000 # Eg. RTP packets are sent to port 3000.

#------------------------------------------------------------------

#Configuration Server Settings

#=============================

#Notes: This section defines which server the phone retrieves new

#firmware images and configuration files from. Three protocols are

#supported TFTP, FTP and HTTP

download protocol: TFTP # valid values are TFTP, FTP and HTTP

##TFTP server settings tftp server: 192.168.0.130 #alternate tftp server:

#use alternate tftp server: 1

#If your DHCP server assigns

#a TFTP server address which

#you do not use, you can use

#the alternate tftp server.

## FTP server settings

#ftp server: 192.168.0.131 # can be IP or FQDN

#ftp username: aastra

#ftp password: 6757iaastra

## HTTP server settings (for http://bogus.aastra.com/firmware/) #http server: bogus.aastra.com # can be IP or FQDN

#http path: firmware

#------------------------------------------------------------------

C-11 41-001343-02 REV04 – 05.2014