Aastra Telecom 41-001343-02 manual Advanced Operational Parameters, Blind Transfer Setting

Advanced Operational Parameters

Advanced Operational Parameters

The following parameters in this section allow the system administrator to set advanced operational features on the IP phones.

Blind Transfer Setting

Parameter –	Configuration Files
sip cancel after blind transfer	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Forces the phone to use the Blind Transfer method available in software prior to release
	1.4. This method sends the CANCEL message after the REFER message when blind trans-
	ferring a call.
Format	Boolean
Default Value	0	(disabled)
Range	0	(disabled)
	1	(enabled)
Example	sip cancel after blind transfer: 1

Semi-Attended Transfer Settings

Parameter –	Configuration Files
sip refer-to with replaces	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Flag for controlling the mode of a semi-attended transfer.
Format	Boolean
Default Value	0
Range	0 or1
Example	sip refer-to with replaces: 1

Update Caller ID Setting

Parameter –	Configuration Files
sip update callerid	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Enables or disables the updating of the Caller ID information during a call.
Format	Boolean
Default Value	0	(disabled)
Range	0	(disabled)
	1	(enabled)
Example	sip update callerid: 1

A-205 41-001343-02 REV04 – 05.2014