Aastra Telecom 41-001343-02 manual Voicemail Settings, Play shows List Empty

Operational, Basic, and Advanced Parameters

Parameter –	Configuration Files
sip lineN autodial timeout	aastra.cfg, <model>.cfg, <mac>.cfg
(N is a line number from 1 to 9)
Description	On a per-line basis, this parameter specifies the time, in seconds, that the phone waits
	to dial a pre-configured number after the handset is lifted from the IP phone cradle.
	If this parameter is set to 0 (hotline), the phone immediately dials a pre-configured
	number when you lift the handset. If this parameter is set to a value greater than 0, the
	phone waits the specified number of seconds before dialing the pre-configured
	number (warmline) when you lift the handset.
	Default is 0 (hotline).
Format	Integer
Default Value	0
Range	0-120
Examples	sip line1 autodial timeout: 30

Voicemail Settings

Parameter –	Configuration Files
sip lineN vmail	aastra.cfg, <model>.cfg, <mac>.cfg
(N is a line number from 1 to 9)
Description	Use this parameter in the <mac>.cfg file to configure the phone to dial a specific
	number to access an existing voicemail account on a Service Provider’s server. The user
	then follows the voicemail instructions for listening to voicemails.
	Note:
	The phone must have a registered voicemail account from a server for this feature to be
	enabled. When no registered voicemail accounts are registered to the phone, the dis-
	play shows "List Empty".
	The phone displays up to 99 voicemails for an account even if the number of voicemails
	exceeds the limit.
	Registered account numbers/URIs that exceed the length of the screen, either with or
	without the voicemail icon and the message count, are truncated with an ellipse char-
	acter at the end of the number/URI string.
Format	String
Default Value	Not Applicable
Range	0-99
Example	sip line1 vmail: *97
	Note:
	In the above example, the user would dial *97 to access the voicemail account.

A-105 41-001343-02 REV04 – 05.2014