Aastra Telecom 41-001343-02 manual Backlight Mode Settings

Operational, Basic, and Advanced Parameters

Parameter –	Configuration Files
dst end hour	aastra.cfg, <model>.cfg, <mac>.cfg
Description	The hour that DST ends. Valid values are an integer from 0 (midnight) to 23.
Format	Integer
Default Value	Not Applicable
Range	0 (midnight) to 23
Example	dst end hour: 23

Backlight Mode Settings

Note:

Applicable to the 6735i, 6737i, 6755i, 6757i, 6757i CT, and 6865i IP Phones only.

Parameter –	Configuration Files
backlight mode	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Allows you to turn the backlight on the LCD, Off (always off) or Auto. The “Auto” setting
	sets the phone to turn off the backlight after a period of inactivity. You can set the
	amount of time before the backlight goes off using the “Backlight on Time” option (“bl
	on time” parameter).
Format	Integer
Default Value	1 (Auto)
Range	0(Off - Turns the backlight off constant)
	1(Auto - Turns the backlight off after a period of inactivity.)
	Note:
	In the IP Phone UI, the options for this parameter are “Off” and “Auto” only.
Example	backlight mode: 0
Parameter –	Configuration Files
bl on time	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Allows you to set the amount of time, in seconds, that the backlight stays ON before
	turning OFF because of inactivity. This setting is applicable to the “Auto” mode only.
Format	Integer
Default Value	600 seconds (equals 10 minutes)
Range	1-7200 seconds
Example	bl on time: 15

A-53 41-001343-02 REV04 – 05.2014